Samsung 7 SERIES User Manual

Also see for 7 Series: User manual User manual User manual User manual User manual

English - 12Switching Between VideoSourcesPress SOURCE button to switch between devicesconnected to the TV.For example, to switch to a game console connectedto the second HDMI connector, press SOURCE button.From the Source list, select HDMI2. The connectornames may vary depending on the product. Select Toolsbutton at the upper-right corner of the screen to accessthe following functions.• Anynet+ (HDMI-CEC)A list appears showing Anynet+ compatible ones ofexternal devices connected to the TV.✎ This function is only available Anynet+ (HDMI-CEC) function set to On.• Edit NameYou can rename devices connected to the TV tomore easily identify external sources.With a computer connected to the TV's HDMI (DVI)port via an HDMI cable, for example, you can changeEdit Name to PC.With a computer connected to the TV's HDMI (DVI)port via an HDMI-to-DVI cable, for example, you canchange Edit Name to DVI PC.With an AV device connected to the TV's HDMI (DVI)port via an HDMI-to-DVI cable, for example, you canchange Edit Name to DVI Devices.• InformationView detailed information about the connecteddevices.• Disconnect USB DeviceRemove the USB device from the list safely. Thisfunction is only available when the USB deviceselected.• Universal remote setupTo add a new external device to control it with theSmart Touch Control, press the SOURCE button andselect Universal remote setup on the top right ofthe screen.Using the universal remote control, users can controlexternal devices connected to the TV, such as asettop box, Blu-ray player, and AV receiver.Connecting to a COMMONINTERFACE slot(Your TV viewing Card Slot)✎ Turn the TV off to connect or disconnect a CI cardor CI card adapter.Attaching the CI Card AdapterTV RearAttach the adapter as shown above.✎ To install the CI CARD Adapter, please remove thesticker attached to the TV.To connect the CI CARD Adapter, follow these steps.✎ We recommend attaching the adapter beforeinstalling the wall mount, or inserting the “CI or CI+CARD”.1. Insert the CI CARD Adapter into the two holes on theproduct 1.✎ Please find two holes on the rear of the TV,beside the COMMON INTERFACE port.2. Connect the CI CARD Adapter into the COMMONINTERFACE port on the product 2.3. Insert the “CI or CI+ CARD”.We recommend that you insert the CI card before youmount the TV on a wall. It may be difficult to insert aftermounting. Insert the card after attaching the CI CardAdapter on TV. It is difficult to attach the module if youinsert the card before attaching.Using the “CI or CI+ CARD”• If you don’t insert the “CI or CI+ CARD”, somechannels will display the message “ScrambledSignal”.[UF7000-XN_ZF]BN68-04851F-04L04.indb 12 2013-11-15 10:46:43