Samsung 7 SERIES User Manual
Also see for 7 Series: User manualUser manualUser manualUser manualUser manual
                                                                                                                                                                                                                                                     | |
Contents
|
45English04 Advanced FeaturesAnynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Changes Anynet+ mode to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu ofthe DVD recorder will appear.(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, theplay menu of the DVD recorder will appear.Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices thatsupport the recording function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).Setting Up Anynet+¦Setup■Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.When the✎ Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.The active source on the TV must be set to TV to use the Anynet+ function.✎ Even if an external device is still recording, it may turn off.✎Switching between Anynet+ Devices¦1. Anynet+ devices connected to the TV are listed.If you cannot find a device you want, press the Red button to refresh the list.✎2. Select a device and press the ENTERE button. You can switch to the selected device.Only when you set✎ Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switchingx operation.If you have selected external input mode by pressing thex SOURCE button, you cannot use the Anynet+ function.Make sure to switch to an Anynet+ device by using the Device List.Recording¦You can make a recording of a TV Programme using a Samsung recorder.1. Select Recording.When there are more than two recording devices✎ When multiple recording devices are connected, the recording devices are listed. Select one recording device inx the Device List.When the recording device is not displayed, select✎ Device List and press the Red button to search devices.2. Press the EXIT button to exit.You can record the source streams by selecting✎ Recording: (device_name).Pressing the✎ � (REC) button will record whatever you are currently watching. If you are watching video fromanother device, the video from the device is recorded.Before recording, check whether the antenna jack is properly connected to the recording device. To properly✎ connect an antenna to a recording device, refer to the recording device’s users manual. |
Related manuals for Samsung 7 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine