Samsung 7 series User Manual

Also see for Galaxy 8: User manual User manual User manual User manual User manual

23English03 Basic FeaturesPicture Reset (OK / Cancel)Resets your current picture mode to its default settings.¦ Setting up the TV with Your PCSet the input source to PC.Auto Adjustment tAdjust frequency values/positions and fine tune the settingsautomatically.✎ Not available when connecting with an HDMI/DVI cable.Screen■ Coarse / Fine: Removes or reduces picture noise. If thenoise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjustthe picture so that it is aligned to the centre of screen.■ Position: Adjust the PC screen position with directionbutton (▲ / ▼ / ◄ / ►).■ Image Reset: Resets the image to default settings.Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP)Depending on the version of Windows and the video card,the actual screens on your PC may differ in which case thesame basic set-up information will almost always be applied.(If not, contact your computer manufacturer or SamsungDealer.)1. Click on “Control Panel” on the Windows start menu.2. Click on “Appearance and Themes” in the “ControlPanel” window and a display dialog-box will appear.3. Click on “Display” and a display dialog box will appear.4. Navigate to the “Settings” tab on the display dialog-box.y The correct size setting (resolution) [Optimum: 1920 X1080 pixels]y If a vertical-frequency option exists on your displaysettings dialog box, the correct value is “60” or “60 Hz”.Otherwise, just click “OK” and exit the dialog box.Sound Menu¦ Changing the Preset Sound ModeSRS TheaterSound t■ Standard: Selects the normal sound mode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound for movies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.¦ Adjusting Sound SettingsEqualizerAdjusts the sound mode (standard sound mode only).■ Balance L/R: Adjusts the balance between the right andleft speaker.■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (BandwidthAdjustment): Adjusts the level of specific bandwidthfrequencies.■ Reset: Resets the equalizer to its default settings.¦ Sound Systems, Etc.SRS TruSurround HD (Off / On) t(standard sound mode only)This function provides a virtual 5.1 channel surround soundexperience through a pair of speakers using HRTF (HeadRelated Transfer Function) technology.SRS TruDialog (Off / On)(standard sound mode only)This function allows you to increase the intensity of a voiceover background music or sound effects so that dialog canbe heard more clearly.