English - 2Melody → Off / Low / Medium / HighA melody sound can be set to come on when the TV is powered On or Off.The Melody does not playWhen no sound is output from the TV because the MuTE button has been pressed.When no sound is output from the TV because the volume has been reduced to minimum with the volum (-) button.When the TV is turned off by Sleep Timer function.Energy Saving → Off / Low / Medium / High / AutoThis feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the EnergySaving mode option to High to reduce eye fatigue as well as power consumption.Press the TooLS button to display the Tools menu. You can also set the Energy Saving option by selecting Tools → EnergySaving.PIPFor detailed procedures on setting up options, refer to the ‘Viewing Picture-in- Picture’ instructions.Common InterfaceCI MenuThis enables the user to select from the CAM-provided menu.Select the CI Menu based on the menu PC Card.Application Info.This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the CI CARD. Youcan install the CAM anytime whether the TV is ON or OFF.1. Purchase the CI CAM module by visiting your nearest dealer or by phone.2. Insert the CI CARD into the CAM in the direction of the arrow until it fits.3. Insert the CAM with the CI CARD installed into the common interface slot.(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)4. Check if you can see a picture on a scrambled signal channel.Setting the TimeClockSetting the clock is necessary in order to use the various timer features of the TV.The current time will appear every time you press the INFo button.If you disconnect the power cord, you have to set the clock again.Clock ModeYou can set up the current time manually or automatically.Auto: Set the current time automatically using the time from the digital broadcast.Manual: Set the current time to a manually specified time.Depending on the broadcast station and signal, the auto time may not be set correctly. Ifthis occurs, set the time manually.The Antenna or cable must be connected in order to set the time automatically.Clock SetYou can set the current time manually.This function is only available when Clock Mode is set to Manual.You can set the day, month, year, hour and minute directly by pressing the number buttonson the remote control.Sleep TimerThe sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).Press the TooLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.To cancel the Sleep Timer function, select off.❑N❑T❑❑■■¦❑ON■●●NN■NN❑TNClock : -- : -- ▶Sleep Timer : OffTimer 1 : InactivatedTimer 2 : InactivatedTimer 3 : InactivatedU Move E Enter R ReturnTimePlug & PlayLanguage : EnglishTime ▶Game Mode : OffBD Wise : OnNetwork Type : CableNetwork SetupChild Lock : OnChange PINParental LockSetup
