Samsung 7 series User Manual

Also see for 7 Series: User manual User manual User manual User manual User manual

Contents

English - 60Setting Up Anynet+Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu byselecting Tools → Anynet+ (HDMI-CEC).SetupAnynet+ (HDMI-CEC) → Off / OnTo use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations aredeactivated.Auto Turn Off → No / YesSetting an Anynet+ Device to turn Off automatically when the TV is turned Off.The active source on the TV remote must be set to TV to use the Anynet+ function.If you set Auto Turn Off to Yes, connected external devices are also turned off when theTV is turned off. If an external device is still recording, it may or may not turn off.Switching between Anynet+ Devices1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.Anynet+ devices connected to the TV are listed.If you cannot find a device you want, press the red button to scan for devices.3. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. Itis switched to the selected device.Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the DeviceList menu appears.Switching to the selected devices may take up to 2 minutes. You cannot cancel theoperation during the switching operation.The time required to scan for devices is determined by the number of connected devices.When the device scan is complete, the number of devices found are not displayed.Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected tothe TV may not always be automatically displayed in the device list. Press the red button to search for the connected device.If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure toswitch to an Anynet+ device by using the Device List.Anynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.Anynet+ Menu DescriptionView TV Anynet+ mode changes to TV broadcast mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the discmenu of the DVD recorder will appear.(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected,the play menu of the DVD recorder will appear.Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices thatsupport the recording function.)Stop Recording: (*recorder) Stops recording.Receiver Sound is played through the receiver.If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device isconnected, it will be represented as (*device_name).¦T❑■N■NN¦NNNNNNNNNU Move E Enter R ReturnAnynet+ (HDMI-CEC) : On ▶SetupAuto Turn Off : YesMedia Play (USB & DLNA)Anynet+ (HDMI-CEC)Content LibraryInternet@TVHome Network CentreApplicationU Move E Enter R ReturnAnynet+ (HDMI-CEC) : OnSetupAuto Turn Off : Yes ▶U Move E Enter R ReturnView TVDevice ListRecording: DVDRDVDR MENUDVDR INFOReceiver: OffSetup