Samsung 800 PN42A450PD User Manual

Contents

English - 8Press the POWER button on the remote control.You can also use the POWER button on the TV.➢ It may take a while before you see a full picture.Turning the TV On and OffViewing the Menus1 With the power on, press the MENU button.The main menu appears on the screen. Its left sidehas five icons:Picture, Sound, Channel, Setup, Input.2 Press the ▲ or ▼ button to select one of the icons.Then press the ENTER button to access the icon’ssub-menu.3 Press the EXIT button to exit.➢ It takes about one minute until the on-screenmenu disappears.Your TV can memorize and store all of the available channelsfor both “off-air” (air) and cable channels. After the availablechannels are memorized, use the CHW.LINKor CHW.LINK buttonto scan through the channels. This eliminates the need tochange channels by entering the channel digits. There arethree steps for memorizing channels: selecting a broadcastsource, memorizing the channels (automatic) and adding anddeleting channels (Channel Lists).Memorizing the ChannelsSelecting the Video Signal-source2 Press the ENTER button to select Antenna.Press the ▲ or ▼ button to select Air or Cable,then press the ENTER button.Press the EXIT button to exit.Mode : Standard ►Cell Light 10Contrast 100Brightness 45Sharpness 75Color 55Tint G 50 R 50▼ MorePictureT VEnterMove ExitAntenna : AirAuto ProgramClear Scrambled ChannelChannel ListNameFine TuneSignal StrengthChannelT VEnterMoveAirCableReturnStoring Channels in Memory(Automatic Method)1 Press the MENU button to display the menu.Press the ▲ or ▼ button to select Channel, thenpress the ENTER button.2 Press the ▲ or ▼ button to select Auto Program,then press the ENTER button.● Air: Air antenna signal.● Cable: Cable antenna signal.● Auto: Air and Cable antenna signals.3 Press the ▲ or ▼ button to select the antennaconnection, then press the ENTER button.Antenna : Air ►Auto Program ►Clear Scrambled Channel ►Channel List ►Name ►Fine Tune ►Signal Strength ►ChannelT VEnterMove ReturnAuto ProgramT VSelect the antenna to execute the AutoProgram function.AirCableAutoStartStartEnterMove ReturnStartSelects a cable signal type for your location.Auto ProgramT VEnterMove ReturnAnalogDigitalStartSTDHRCIRCSTDHRCIRCBefore your television can begin memorizing the availablechannels, you must specify the type of signal source that isconnected to the TV (i.e. an Air or a Cable system).1 Press the MENU button.Press the ▲ or ▼ button to select Channel, thenpress the ENTER button.Antenna : Air ►Auto Program ►Clear Scrambled Channel ►Channel List ►Name ►Fine Tune ►Signal Strength ►ChannelT VEnterMove Return