Samsung 8340 User Manual

15For further information, visit videotron.com/terminal-support.pRoGRAMMING yoUR REMoTE CoNTRoL wITH A CoDEFollow the instructions below if you would like to program the remote control to your TV andaudio system.1. Turn on your TV or audio system. Program your TV first.2. Find the code corresponding to the brand of your device in the list at the back of this guide.The brands are listed in alphabetical order.3. Hold down and until the red light under blinks twice, then release both buttons.4. Enter the first five-digit code on your device. If you have done it correctly, the backlightwill blink twice.NOTE: If the button blinks once and remains lit for a long time, this means the code you haveentered is invalid. Repeat steps 3 and 4 using the same code or another code, if possible.5. Point the remote control at your device and press . The device should turn off. If nothinghappens, repeat steps 2 to 5.6. To program your audio device, repeat steps 2 to 5.7. When your remote control has been programmed, we strongly recommend that you selectits model and volume control in order to ensure that it works properly (see the EquipmentSettings section on page 16).Your TV code: _________________Your audio system code: _________________NOTE: When you have programmed the remote control to your audio system, you will nolonger be able to adjust the volume on your TV, only on your audio system. However, thissetting can be modified by following the instructions on page 16 (see the Change How YourRemote Control is Programmed section).