Samsung AC026HBLDKH Installation Instructions Manual

Also see for AC026HBLDKH: User manual Manual

321. Prepare a compressor and the following tools.Tools Crimping pliers Connection sleeve (mm) Insulation tape Contraction tube (mm)Spec MH-14 20xØ6.5(HxOD) Width 19mm 70xØ8.0(LxOD)Shape2. As shown in the figure, peel off the shields from the rubber or wire of thepower cable.- Peel off 20 mm of the wire shields of the tube installed already.• After peeling off the tube wire, you must insert a contraction tube.• For information about the power cable specifications for indoor andoutdoor units, refer to the installation manual.CAUTION (Unit: mm)Power cable (provided by us)Wire tube power cable3. Insert both sides of core wire of the power cable into the connection sleeve. Method 1Push the core wire into the sleeve from both sides.Connection sleeve Method 2Twist the wire cores together and push it into the sleeve.Connection sleeve4. Using a compressor, compress the two points and flip it over and compress another two points in the same location.- The compression dimension should be 8.0.- After compressing it, pull both sides of the wire to make sure it is firmly pressed.Compressiondimension Method 1Compress it 4 times.5 mm Method 2Compress it 4 times.5 mmHow to connect your extended power cables

/ 35

Related manuals for Samsung AC026HBLDKH