Samsung AC026NNNDKH Service Manual

Also see for AC026MXADKH: Installation manual Service manual

Contents

Samsung Electronics4-7• If any of SEG5 and SEG6 is set to a value in the range A to F, the main address of the indoor unit does not change.• If SEG3 is set to 0, the indoor unit maintains the existing main address even if SEG6 is set to a new value.• If SEG9 is set 0, the indoor unit maintains the existing RMC address even if SEG11 and SET12 are set to new values.4-1-3 Setting the installation options in a batchOption No. for an indoor unit address: 02XXXX-1XXXXX-2XXXXX-3XXXXX1 Make sure that the power is supplied to theindoor unit. If the indoor unit is not plugged in, itmust include a power supply.F11(L) 2(M)F2 V1 V2 F3 F4Indoor Unit2 Set the installation options of indoor units, by referring to the following table and by following the steps in Commonsteps for setting the addresses and options on page 4-1.• The installation options of indoor units are set to like a below table by default.ModelAC026NNNDKHAC035NNNDKHAC052NNNDKHAC060NNNDKHAC071NNNDKHInstallation option 020000-100001-200000-300000 020000-100031-200000-300000• The SEG20 option, Individual control with remote control, allows you to control multiple indoor units individuallyby using the remote control.Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6Function Page ModeWhetherto dry theEvaporatorUse of externaltemperaturesensorUse of central control Compensation ofthe fan RPMIndicationanddetailsIndication Details Indication DetailsReservedIndication Details Indication Details Indication Details0 20 Disuse 0 Disuse 0 Disuse1 Use 1 Use 1HighceilingmodeOption SEG7 SEG8 SEG9 SEG10 SEG11 SEG12Function Page Use of drainpumpReserved ReservedCompensation of thewind-free fan RPMDew removaloperation inWind-Free modeIndicationanddetailsIndication Details Indication Details Indication Details Indication Details10 Disuse ModelAC026NNNDKH,AC035NNNDKH,AC052NNNDKH,AC060NNNDKHAC071NNNDKH0Maintainblade statusin Wind-Free mode0 Default 3 step ↑1 Use 1 1 step ↑ 2 step ↑2Use with3 minutedelay2 2 step ↑ 1 step ↑1(Default)Coolingoperationby openingthe blade3 3 step ↑ Default