Samsung AC035MNLDKH Installation Manual

Contents

Installation ProcedureEnglishOption SEG17 SEG18 SEG19 SEG20Explanation Buzzer control Number of hours using filter PAGE control of a remote controllerIndicationand DetailsIndication Details Indication Details Indication Details Indication Details0 Use ofbuzzer 2 1000 Hour30 or 1 Indoor 11Nonuse ofbuzzer6 2000 Hour2 Indoor 23 Indoor 34 Indoor 4Option SEG21 SEG22 SEG23 -Explanation Heating settingcompensationRESERVEDAway Set OFF Timer -Indicationand DetailsIndication Details Indication Details -0 Disuse 0 or 1 Auto Set OFF 30Min.-1 2°C 2 Auto Set OFF 60Min.2 5°C3 Auto Set OFF 120Min.4 Auto Set OFF 180Min.5 Press the button to save and complete the option setting.6 Press the button to exit to normal mode.• Level control : The centralized controller can limit the functions and inputs of connected products with this functionenabled. [ Example: Operation mode limit (Cooling only/Heating only/No limitation), Heatingtemperature upper limit, Cooling temperature lower limit ] To enable 'Level control' when applyingthe DPM with the centralized controller, appoint the master (Set 'Use of external control [SEG14]option to 4 or higher).– Example : When installing DPM ( 1 Outdoor unit with 4 indoor units)Condition SEG 14 SettingResultExternal control Level control Indoor 1 Indoor 2 Indoor 3 Indoor 4Default Not set (0) Slave (All)Disuse Use 4 Not set (0) Not set (0) Not set (0) Master (Indoor 1), Slave (Indoor 2,3,4)Use (Indoor 3) Disuse Not set (0) Not set (0) 1~3 Not set (0) Slave (All)Use (Indoor 4) Use Not set (0) Not set (0) Not set (0) 5~7 Master (Indoor 4), Slave (Indoor 1,2,3)NOTE• Press button anytime during setup to exit without setting.• Option code will not be applied if you don't press button.• Setting Installation option code is available only with a master wired remote controller.• Setting Installation option code is available when there is one on one connection between a wired remotecontroller and an indoor unit.Installation Procedure32