Samsung AC160JNHFKH Service Manual

Also see for AC160JNHFKH: Service manual

Contents

Samsung AC160JNHFKH Service Manual Manual pdf 64 page image

4-32 Samsung Electronics4-4 Setting Option Setup Method■ Setting Option Setup MethodIn order to set the indoor unit option code use the wired remote controller and follow the directions below.1) Press the and buttons at the same time for more than 3 seconds and then a Main menu will bedisplayed.2) Press the / button to select and then press button to enter a Sub-menu setting screen.3) Press the / button to select and then press button to enter a Indoor unit option code settingscreen.4) Press the / button to set the option code in order. Press button to go to the next page.5) Press the button to save and complete the option setting.6) Press the button to exit to normal mode.• Option code will not be applied if you don’t press the• Setting indoor unit option code is only possible in Master wired remote controller.You can only check the indoor unit option code in Slave wired remote controller.• Setting indoor unit option code is possible when one indoor unit is connected. If more than 2indoor units are connected, you can only check the Master indoor unit option code.• Press the button anytime during setup to exit without setting.NOTENOTE• The first digit represents the page number and the remaining five digits are option codes.• The option code which is currently setting will flicker.Main Menu Sub-menu 1 2 3 54 6Data bit1 2 3 4 5 6Option CodePage numberSEG1 SEG2 SEG3 SEG4 SEG5 SEG60 ✴ ✴ ✴ ✴ ✴Page numberSEG7 SEG8 SEG9 SEG10 SEG11 SEG121 ✴ ✴ ✴ ✴ ✴Page numberSEG13 SEG14 SEG15 SEG16 SEG17 SEG182 ✴ ✴ ✴ ✴ ✴Page numberSEG19 SEG20 SEG21 SEG22 SEG23 SEG243 ✴ ✴ ✴ ✴ ✴Page number