Samsung ACH2400C Owner's Instructions & Installation Manual

Also see for ACH2400C: Service manual Owner's instructions & installation manual

Contents

installation manual

Cooling Your RoomTo select the COOL mode, press the Mode button until is displayedat the top of the wireless remote controller.Result: The indoor unit beeps. The air conditioner runs in COOL mode.2You can change modes at any time.To adjust the temperature, press the Temperature buttons one or moretimes until the required temperature is displayed. Possible temperaturesare between 65OF and 86OF inclusive.Result: Each time you press Temperature buttons:- The temperature is adjusted by 1OF.- The indoor unit beeps. The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature ; the fan will, however, operate.3You must select the COOL mode if you wish to adjust the : Cooling temperature Fan speed when cooling1 If necessary, press (ON/OFF) button.Result: The On/Off indicator on the unit comes on. The air conditioner runs in the mode selected when theunit was last used. The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Plugged in Stoppedlt will start up normally after three minutes.IMPORTANTSelect the fan speed by pressing the Fan button one or more times untilthe intended value is displayed :4To control the direction of the air flow, refer to page 25.5NNNN oooo tttt eeeeAutomatic(rotated : ➔ ➔ )LowMediumHighE-22