ENGMISCELLANEOUS4746The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.1In Stop mode, press theMENUbutton.2Press the Cursorbutton to move toand then press theENTERbutton.3Press the Cursorbutton to move toand then press theENTERbutton.4Press the Cursor,button to select or and then press theENTERbutton.•ON : Both video and audio signals are transmitted over the HDMI connection cable, and audiois output through your TV speakers only.•OFF : Video is transmitted over the HDMI connection cable only, and audio is output throughthe home theater speakers only.Press theRETURNbutton to return to the previous level.Press theEXITbutton to exit the setup screen.Setting the HDMI AudioMOVEENTEREXITRETURNMOVESELECTEXITRETURN•The default setting of this function is HDMI AUDIO OFF.•HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.Settings(Con’t)Listening to Radio1Press theTUNERbutton to select the FM band.2Tune in to the desired station.Automatic Tuning 1 : When thebutton is pressed, a preset broadcast station is selected.Automatic Tuning 2 : Press and hold thebutton to automatically search for activebroadcasting stations.Manual Tuning : Briefly press thebutton to increase or decrease the frequency incrementally.1Press theFUNCTIONbutton to select the FM band.2Select a broadcast station.Automatic Tuning 1 : Press theSTOP() button to selectand then press thebutton to select the preset station.Automatic Tuning 2 : Press theSTOP() button to selectand then press and holdthebutton to automatically search the band.Manual Tuning : Press theSTOP() button to selectand then briefly press thebutton to tune in to a lower or higher frequency.Press theMO/STbutton to listen in Mono/Stereo.Each time the button is pressed, the sound switches between(STEREO)and(MONO).In a poor reception area, select(MONO) for a clear, interference-free broadcast.,,Remote ControlMain Unit
