Samsung AHT18P1HBA Owner's Instructions Manual

Contents

Method of Installation (Cont.)Installation of the Drain TubeFix the drain tube as shown in the figure.Installation of the Drain PanThe procedure for installing the drain pan should be determined by thecondition of the installing area. In the case of an area where the drain pan can not be directlyinstalled on the rear side of the unit after installing the air conditioner.Example: High storageRemove two screws on the lower, right and left sides of the unit.3Open the front grille.1Remove the front panel.2-1 Press both sides of the cabinet in the direction of the arrowas shown in the figure.2-2 Pull the lower part of the front panel slightly forward.(below three inches)2-3 Lift the front panel upward.2Applying excessive force to remove the front panelmay cause damage to the tab ; be sure not to useexcessive force.☛Rubber capScrews(2EA)GasketRearDrain TubeFront panelE-16Removal and Reassembly of the Front GrilleGrasp the lower part of the front grille and the air filter handle, thenopen the grille.(The open angle of front grille has not to be exceeded 90 degree)1Push the front grille on the left and remove it from the front panel.2Reassembling of front grille should be done in reverse order ofdisassembly.3CC AA UU TT II OO NN

/ 18

Related manuals for Samsung AHT18P1HBA