19EnglishAdvanced OperationSetting the On or Off timerYou can set the air conditioner to be turned on or off automatically at the desired time.Setting the On timerWhen the air conditioner is turned off:1. Press the button to select (On).• The (On) indicator will keep blinking and you can set the time.2. Press the or button to set the time.• You can set the time in half hour intervals from30 minutes (0.5 on the display) to 3 in hour intervalsfrom 3 to 24 hours.• The time can be set from minimum 30 minutes tomaximum 24 hours.3. Press the button to complete the On timer setting.• The (On) indicator and the set time of the timer will bedisplayed on the remote control display.• On timer setting will be cancelled if you don't press thebutton within 10 seconds after setting the time.Therefore, check for the (On) indicator on the remotecontrol display.CancelPress the button ► select (On) ► pressthe or button ► set the timer to► press the buttonRemote control displayAdditional options available in the On timerSelect the mode in the following order: (Auto) ► (Cool) ► (Dry) ► (Fan) and ► (Heat).You can adjust the temperature after timer setting is completed.Temperature adjustment is only available in Auto, Cool, Dry, and Heat modes. In Fanmode, the temperature cannot be adjusted.NOTE• When On timer setting is completed, the setting will be displayed for 3 seconds, and then only the(On) indicator will remain on the remote control display.• You cannot set the Fan speed when setting the On timer.DVM_BORACAY_IB_DB68-06415A-00_EN.indb 19 2016-08-31 오후 2:13:22