33AAThe following accessories are supplied with the indoor unit.The type and quantity may differ depending on the specifications.AccessoriesUser & InstallationmanualInsulation coverpipe inInsulation coverpipe outInsulation drain Insulation coverdrainInsulation pipe Cable tieFlexible hose Clamp hoseSelecting the installation locationX There must be no obstacles near the air inlet and outlet.X Install the indoor unit on a ceiling that can support its weight.X Maintain sufficient clearance around the indoor unit.X Make sure that the water dripping from the drain hose runs away correctly and safely.X The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)X After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10 or thickerinsulation. Otherwise, there can be air leak or dew from the connection part.X Rigid wall without vibration.X Where it is not exposed to direct sunshine.X Where the replacement parts. (air filter, heat exchange element, humidifier element) can be removed and cleaned easily.Space RequirementsModel 'A' 'B' 'C' 'D' 'E'AM050FNKDEH 1000 1553 600 200 450 x 450 or moreAM100FNKDEH 1135 1763 800 300 550 x 550 or moreInspection hole('E'mm)GPS%9$0*- )VNJEJöFSFMFNFOUInspection hole('E'mm)for filter, heat exchange element, fan,motor and damper'B' mm'A' mm'D' mmReturn AirExhaust AirSupply AirOutdoor Air'C' mmENGLISH