Samsung AM7500 User Manual

Contents

❚ Adding a HUBYour WAM speaker and a HUB may not pair successfully if your speaker and the HUB are toofar apart or are on different floors.In such cases, you can link two HUBs together by setting the second HUB to Repeater mode.The additional HUB amplifies the signal and lets you pair your speaker to the closest HUB.1 Set the HUB that is connected to the wireless routerto Pairing mode by pressing its SPK ADD button for 1second.2 Plug in the new HUB you are using as an extender,and then press its SPK ADD button for 10 seconds.3 The newly added HUB's LED indicators turn off andon, and it switches to Repeater mode.4 Once the connection between the two HUBs has beenestablished, the added HUB's ( ) indicator stopsblinking.NOTES9 If your smart device is not connected to the wireless routerwith a Wi-Fi connection, your WAM speaker will not appearon the Samsung Multiroom app.9 Place the HUB that is in Repeater mode in an appropriatelocation between the speaker and the HUB that is connected to the wireless router.9 You can set only one HUB to Repeater mode.Relocating the productWhen relocating your WAM speaker, refer to the below table.Wireless routerHUBIf you want to connect your WAMspeaker to the current wireless router.If you want to connect your WAMspeaker to a different wireless routerWithout a HUBTurn off the speaker, relocate it and thenturn it on.Turn off the speaker, relocate it, thenestablish the new connection as describedin the installation instructions on pages 9through 15. Click here.With a HUBConnect a LAN cable between the HUBand the new wireless router, turn on theHUB, and then turn on the speaker.ProductHUBUsed as aextender1944