E-19ENGLISHSelecting the Energy Saving Function The temperature decreases by 1°C every hour. After a decrease of 2°C,the temperature is maintained. You can set the airflow blades and fan speed separately during Good Sleepmode.In cool modeIn heat modeGood Sleep mode keeps the skin temperature at the best during the 3 stagessuch as, Falling Asleep Stage Sound Sleep Stage Wake Up Stage in order.Falling Asleep Stage :This stage supports the environment to quickly cool down. Together withcomfortable intermittent air, you will be able to fall asleep quickly.Sound Sleep Stage :This stage helps users to take deep sleep and keep the healthy skin bycontrolling wavy temperature control and insensible air stream.Wake Up Stage :This stage supports comfortable intermittent air to the room to raise humanbody temperature for refreshing wake up. The recommended temperature is set between 25°C and 27°C, and 26°C isthe most ideal temperature for comfortable sleep. Airflow blades and fan speed are controlled automatically as the above 3 stagesin Good Sleep mode. Set Off timer in Good Sleep mode over 5 hours. You feel disturbed sleepif the Good Sleep is set too short or long because the basic off timer is set for 8hours. If the Good Sleep mode is set less than 4 hours, the operation will be stoppedafter the set time. If the Good Sleep mode is set over 5 hours, it will run as WakeUp stage for the last one hour before stop.Set temperatureWhen the set time is over 8 hours,this section will be repeated.Temp.Time(hr.)