Samsung AQ09VWCN User Manual

Also see for AQ09V Series: Installation manual User manual User manual

Contents

E-18Selecting Modemode helps users to fall asleep well after going to bed whetherbeing too hot to sleep or being awakened by coldness. The mode can beselected only when the air conditioner is switched on or off in cool/heat mode.1 Press the (On/Off) button.Result:  The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.2 Press the button to select cool or heat mode.Result:  The indoor unit beeps each time you press the button. The air conditioner runs in cool or heat mode.3 Press the button.Result:  The timer indicator is displayed. The Off timer is blinking on the remote control.4 To set the Off timer, press the buttons once or more timesuntil the required Off time is displayed.Result:  The mode will be automatically stopped in8 hours if the operation time is not set. You can set the Off timer by pressing the buttons toturn off the mode automatically at theappointed time within a range of 30 minutes to 12 hours. Each time the buttons are pressed, the time isincreased by 30 minutes or 1 hour. mode will bestopped at the appointed off time.5 Press the button.Result: The remaining time is displayed.Note In the case of selecting mode or adjusting the extratime for mode, you should press the buttonwithin 10 seconds. If you do not press the button within10 seconds, mode will be canceled automatically.6 Press the button to adjust the temperature until the desiredtemperature is displayed.You can set the temperature between 16°C and 30°C.Result: Each time you press the button;- The temperature adjusts by 1°C- The indoor unit beepsTTtaaTT108'VIVACE_CIS_28587A_IB_E.indd 18 2007-12-18 11:07:18