Samsung AQ12FAN User Manual
Also see for AQ09F Series: User manualUser manualUser manualInstruction manual
                      | |
Contents
| 
E -9ENGLISHYou must select the Cool mode if you wish to adjust the:Cooling temperatureFan speed when cooling1 If necessary, press the button.Result: The operation indicator on the indoor unit lights up.The air conditioner starts up in the mode selectedwhen the unit was last used.The indoor unit beeps.IMPORTANT The air conditioner is fitted with a protection mechanismto prevent the unit from being damaged when it is startedimmediately after being:Plugged inStoppedlt will start up normally after three minutes.2 If the is not displayed at the top of the remote control,press the button on the remote control one or more times until itappears.Result: The indoor unit beeps each time you press the button.The air conditioner runs in the Cool mode.Note You can change modes at any time.3 To adjust the temperature, press the button one or more times untilthe required temperature is displayed.Possible temperatures are between 16°C and 30°C inclusive.Result: Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beepsThe air conditioner starts cooling, provided that the roomtemperature is higher than the selected temperature. If the room temperature reaches the set temperature, the airconditioner stops cooling, but the fan is still operating.4 Select the fan speed by pressing the button one or more timesuntil the required setting is displayed:Automatic (rotated : )LowMediumHighMaximumResult: Each time you press the button, the indoor unit beeps.5 To control the direction of the air flow, refer to pages 14.Cooling Your Room |
Related manuals for Samsung AQ09F Series
manualsdatabase
Your AI-powered manual search engine