Samsung AQ30C1(2)BCD Owner's Instructions & Installation Manual

Selecting the Automatic Operating ModeYou can start the air conditioner in Automatic mode from your remotecontrol. In the Automatic mode, the standard temperature and theoptimum fan speed is selected automatically. You can adjust thestandard temperature but not the fan speed.1If the is not displayed at the top of the remote control,press the MODE button on the remote control one or more times until itappears.Result: The indoor unit beeps each time you press the MODE button. The air conditioner runs in AUTO mode.2You can change modes at any time.If necessary, press the (On/Off) button.Result: The 5 Way indicator on the indoor unit lights up. The air conditioner starts up in the mode selectedwhen the unit was last used. The indoor unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Plugged in Stoppedlt will start up normally after three minutes.IMPORTANTNNNN oooo tttt eeeeTo adjust the standard temperature (The air conditioner automaticallyset the standard temperature by the current room temperature.),press the TEMPERATURE buttons one or more times.3SET TEMP. SET TEMP. - SET TEMP. SET TEMP.-4°F/-2°C -2°F/-1°C Standard temperature +2°F/+1°C +4°F/+2°C< When you feel hot > < When you feel chilly >E-10