E-14Selecting the Turbo FunctionYou can select the Turbo Function if you want to cool or heat yourroom in the fastest way. After the 30 - minute operation with themaximum setting, it returns to the previous setting.Press the button.Result: The temperature and fan settings are adjusted automatically. The air conditioner cools or heats the room as quickly as possible. After 30 minutes, the air conditioner is reset automatically to theprevious setting. You can select the Turbo function in the Auto, Cool and Heat mode.If you select this function in the Dry or Fan mode, the modechanges to the Auto mode.2Press the button again to stop the Turbo Function before the end of the30-minute period.Result: The air conditioner is reset automatically to the previous setting.3To control the airflow direction, refer to pages 16 and 17.41 If necessary, press the button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.AQB09JJWC IB_E_DB98-25865 2006.3.27 8:23 PM Page 14