Samsung AQT24A5RE/B Service Manual

Also see for AQ18A9RE: Owner's instructions Service manual

Contents

Samsung Electronics3-43-2 Installation3-2-1 Selecting Area for InstallationSelect an area for installation that is suitableto the customer's needs.3-2-1(a) Indoor Unit1. Make sure that you install the indoor unit inan area providing good ventilation. It mustnot be blocked by an obstacle affecting theairflow near the air inlet and the air outlet.2. Make sure that you install the indoor unit inan area allowing good air handling andendurance of vibration of the indoor unit.3. Make sure that you install the indoor unit inan area where there is no source of heat orvapor nearby.4. Make sure that you install the indoor unit inan area from which hot or cool air is spreadevenly in a room.5. Make sure that you install the indoor unit inan area away from TVs, audio units, cord-less phones, fluorescent lighting fixturesand other electrical appliances (at least 1meter).6. Make sure that you install the indoor unit inan area which provides easy pipe connec-tion with the outdoor unit, and easydrainage for condensed water.7. Make sure that you install the indoor unit inan area which is large enough to accomo-date the measurements shown in figure onthe next page.3-2-1(b) Outdoor Unit1. Make sure that you install the outdoor unitin area not exposed to the rain or direct sunlight.(Install a separate sunblind if exposed todirect sun light.)2. Make sure that you install the outdoor unitin area allowing good air moment, notamplifying noise or vibration, especially toavoid disturbing neighbours.(Fix the unit firmly if it is mounted in ahigh place.)3. Make sure that you install the outdoor unitin area providing good ventilation andwhich is not dusty. It must not be blockedby any obstacle affecting the airflow nearthe air inlet and the air outlet.4. Make sure that you install the outdoor unitin area free from animals or plants.5. Make sure that you install the outdoor unitin area not blocking the traffic.6. Make sure that you install the outdoor unitin area easy to drain condensed water fromthe indoor unit.7. Make sure that you install the outdoor unit inarea which provides easy connectionwithin the maximum allowable length of acoolant pipe(18✳✳: 15meters, 24✳✳: 20meters).8. Make sure that you install the outdoor unitin an area which is large enough to accom-modate the measurements shown in figureon the next page.3-2-1(c) Remote Control Unit1. Make sure that you install the remote con-trol unit in an area free from obstacles suchas curtains etc, which may block signalsfrom the remote control unit.2. Make sure that you install the remote con-trol unit in an area not exposed todirect sunlight, and where there is no sourceof heat.3. Make sure that you install the remote con-trol unit in an area away from TVs, audiounits, cordless phones, fluorescent lightingfixtures and other electrical appliances (atleast 1 meter).Caution :It is harmful to the air conditioner if it is used in the following environments: greasy areas (including areas near machines),salty areas such as coast areas, areas where sulfuric gas is present such as hot spring areas. Contact your dealer for advice.1. Add (18✳✳:30g, 24✳✳:40g) of refrigerant (R-22)for every 1 meter if the pipe length exceeds thestandard pipe length of 5 meters.2. Maintain a height between the indoor and outdoorunits of less than 8 meters.Note