Samsung AQV K Series Manual

38Purging the connected pipesRefrigerant type GWP valueR410A 1975 GWP=Global Warming PotentialIndoor unitOutdoor unit= ( ) kg= ( ) kg += ( ) kgContains fluorinated greenhouse gasescovered by the Kyoto Protocol.acdbThis product contains fluorinated greenhouse gases covered by the KyotoProtocol.Do not vent gases into the atmosphere.1. Please fill in with indelible ink,  the factory refrigerant charge of the product,  the additional refrigerant amount charged in the field and + the total refrigerant charge. on the refrigerant charge labelsupplied with the product.R410A is a mixed type of refrigerant. It is necessary for recharging under conditions of liquid. When recharging refrigerant fromthe refrigerant cylinder to the equipment, follow the instructions below.1. Before recharging, check whether the cylinder has a siphon or not.There are two ways to recharge the refrigerant.Important information regulation regarding the refrigerant usedCharging the refrigerant under conditions of liquid by using a liquid pipea. Factory refrigerant charge of the product:see unit name plateb. Additional refrigerant amount charged in the field (Referto the above information for the quantity of refrigerantreplenishment.)c. Total refrigerant charged. Refrigerant cylinder and manifold for charging• The filled-out label must be adhered in the proximity of the product charging port (e.g. onto the inside of the stopvalve cover).Cylinder with siphonsiphonCharge the refrigerant standing thecylinder upright.Cylinder without siphonCharge the refrigerant turning the cylinderupside down.• If R410A refrigerant is charged with gas, the composition of the charged refrigerant changes and thecharacteristics of the equipment vary.• During the measuring operation of refrigerant quantity added use an electronic balance.If cylinder doesn’t have syphon, upset it.AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 38 2011-3-19 15:45:56