Samsung AQV09USeries User & Installation Manual

Also see for AQV09U Series: User manual

26• Make sure to drill only onehole after choosing thedirection of the pipe.Fixing the installation plateThe following connection accessories are optional. If they are not supplied, you should obtain them before installing the airconditioner.Optional accessoriesTools required for installationGeneral Tools• Vacuum Pump(Backward prevention) • Manifold Gauge • Stud Finder• Torque Wrench • Pipe Cutter • Reamer • Pipe Bender • Spirit Level• Screw Driver • Spanner • Drill • L Wrench • Measuring TapeTools for test operations• Thermometer • Resistance Meter • Electroscopethe installation plate to a wall or a window frame, you must determine the position of the 65mm hole through which the cable,pipe and hose pass to connect the indoor unit to the outdoor unit.When facing the wall, the pipe and cable can be connected from the:• Right (A)• Left (B)• Underside_right (C)• Rear_right or left (D) BADCD Direction of pipe1. Determine the position of the pipe and drain hose hole as seen in the picture and drill the hole with an inner diameterof 65mm so that it slants slightly downwards.If using a multi system, refer to the manual supplied with the outdoor unit.MAX_XSA_IBIM_DB98-33747A_E.pdf120726872(Unit : mm)Pipe hole(Ø65mm)**09/12**InsulatedAssembly Pipe,Ø6.35mm (1)Insulated AssemblyPipe, Ø9.52mm (1)0912Insulated Assembly Pipe,Ø12.70mm (1)18PE T3 Foam TubeInsulation (1) Vinyl Tapes (2)Pipe Clamps A (3) Pipe Clamps B (3) Cement Nails (6) M4 x 25 TappedScrews (6)Drain Hose,length 2m (1)Putty 100g (1)• If these accessories are supplied, they will be in the accessory box.3-wire(1)09/1218 2-wire(1)3-wireAssembly Cable (1)• The (2)(3)(4)-wire assembly cable is optional. If it is not supplied, use the standard cable.Power Cabel Assembly Cabel09/1218 09/1218 170728572(Unit : mm)Pipe hole(Ø65mm)**18**