E-20Selecting Good Sleep ModeGood Sleep mode helps users to fall asleep well after going to bed whetherbeing too hot to sleep or being awakened by coldness. The Good Sleep mode canbe selected only when the air conditioner is switched on in cool/heat mode.1 If necessary, press the button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.2 Press the button to select or mode.Result: The indoor unit beeps each time you press the button. The air conditioner runs in cool or heat mode.3 Press the button until the indicator appears on the remote control.- In the case of adjusting time Press the button to adjust desired operation time from 1 to 12 hours.Good Sleep mode will automatically stop after the set time. Press the button.Result: In the case of adjusting the extra time for Good Sleep mode,youshould press the button within 10 seconds.If you do not pressthe button within 10 seconds.Good Sleep mode willautomatically stop in 8-hour operation.4 Press the button to adjust the temperature until the requiredtemperature is displayed.You can set the temperature between 61°F(16°C) and 86°F(30°C).Result: Each time you press the button:- The temperature is adjusted by 1°F- The indoor unit beeps