E-13ENGLISHSelecting the Fan ModeYou can select the Fan mode if you want to ventilate your room. It helps torefresh the air in your room. You can adjust the fan speed in this mode.1 If necessary, press the (On/Off) button.Result: The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.Press the button to select the fan speed until the required settingis displayed.LowMediumHigh3To control the airflow direction, refer to page 19.4You can change modes at any time.NNNN oooo tttt eeeePress the button on the remote control until is displayed.Result: The indoor unit beeps each time you press the button. The air conditioner runs in the Fan mode. The temperature is set automatically.2Result: Each time you press the button, the indoor unit beeps. The fan speed indicator increases and decreasescontinuously and turns round each time you pressthe button.Control Panel