E -18Before contacting the after-sales service, perform the following simple checks.They may save you the time and expense of an unnecessary call.Problem Explanation/SolutionThe air conditioner does notoperate at allCheck that the breaker used for the air conditioner is switched on.Check that the operation indicator on the indoor unit is on;if necessary press the button on the remote control.Check whether the Timer indicator on the indoor unit is switched on.If so:- Wait until the switch-on time is reached and the air conditioner startsup automatically- Cancel the timer (see pages 14 and 15 for further details)The air conditioner does notoperate with the remote controlCheck that there are no obstacles between you and the indoor unit.Check the remote control batteries.Check that you are close enough to the indoor unit(seven meters/yards or less).No beep is heard when you pressthe on the remotecontrolCheck that you are pointing the remote control at the remote controlsensor in the right of the indoor unit.Replace the remote control batteries if necessary.The air conditioner does not cool Check that the correct operating mode has been selected(Auto, Cool).The room temperature may be too low.Dust may be blocking the air filter guard; refer to page 19 forcleaning instructions.Check that there is no obstacle in front of the outdoor unit.The fan speed does not changewhen you press the buttonCheck that the operating mode is set to the Auto, Cool or Fanmode ; in the Dry mode, the fan speed changes automatically.The air flow direction does notchange when you press thebuttonCheck that the air conditioner has been switched on; if necessary,press the button on the remote control.The timer is not correctly triggered Check that the timer has been programmed correctly; see pages 14and 15.Odour is permeated in the roomduring air conditioningAir the room.Solving Common Problems