SAMSUNG | 25INSTALLATION 5Select an area for installation that is suitable to customer’s needs.5-1. Selecting Area for Installation5-1-1. Indoor Unit1. Make sure that you install the indoor unit in an area providing good ventilation.It must not be blocked by an obstacle affecting the airflow near the air inlet and the air outlet.2. Make sure that you install the indoor unit in an area allowing good air handling and endurance of vibration of the indoor unit.3. Make sure that you install the indoor unit in an area where there is no source of heat or vapor nearby.4. Make sure that you install the indoor unit in an area from which hot or cool air is spread evenly in a room.5. Make sure that you install the indoor unit in an area away from TVs, audio units, cordless phones, fluorescent lighting fixtures and otherelectrical appliances (at least 1 meter).6. Make sure that you install the indoor unit in an area which provides easy pipe connection with the outdoor unit, and easy drainage forcondensed water.7. Make sure that you install the indoor unit in an area which is large enough to accomodate the measurements shown in figure on thenext page.Selecting Area for InstallationCAUTION• It is harmful to the air conditioner if it is used in the following environments: greasy areas (including areas nearmachines), salty areas such as coast areas, areas where sulfuric gas is present such as hot spring areas.Contact your dealer for advice.