Samsung AS18UUAX User Manual

14_ operatingoperating basic functionTURNING THE AIR CONDITIONER ON AND OFFPress the Power button on the remote control.You will hear a beep and the air flow blade will move up and downautomatically when the air conditioner is properly on.The air conditioner will operate in the most recent operation modeused or Auto mode.When you turn off the air conditioner, air flow blade will stop movingand remain closed.Turning on/off your air conditioner without the remote control.You can operate your air conditioner by pressing the Power button on the right bottom side of theair conditioner.SELECTING OPERATION MODEAutoIn Auto mode, the air conditioner will automatically set the temperature and fan speed dependingon the room temperature detected by the room temperature sensor.1. Turn on the air conditioner.Press the Power button on the remote control.2. Set the operating mode.Press the Mode button on the remote control untilAuto mode and Auto fan speed indicator appear on theremote control display.The air conditioner will automatically set the operationmode to Cool depends on the room temperature.Each time you press the Mode button, the mode willchange in order of Auto, Cool, Dry and Fan.3. Adjust the temperature (if you need to increase ordecrease the room temperature).Press the Temp or button on the remote controlto increase or decrease the desired temperature.You can set the desired temperature between therange of 16˚C~30˚C.You can increase/decrease the temperature by 1˚C.• While the air conditioner is already operating in another mode, press the Mode buttonuntil Auto mode indicator appears on the remote control display.• When you are using the remote control, make sure correct indicator which matches yourselection appears on the remote control display.• Air flow can be adjusted manually (see page 18 for instructions).MID_AS09U series_IB_30920A_E_9.09.09.indd 14 2009-9-23 9:53:39