Samsung ASH070VE/D Service Manual

Also see for AS07A1VE: Owner's instructions

Contents

Disassembly and ReassemblySamsung ElectronicsNo Parts Procedure Remark234Ass’y Tray Drain.Electrical Parts(Main PCB)Heat Exchanger1) Do “1”, above.Separate the drain hose from the extensiondrain hose.2) Take the display PCB out.(Center of indoor unit)3) Loosen three fixing screws of left and right4)Pull tray drain out from the back body.1) Do “1”, “2”, above2) Take all the connector of PCB upper side out.(Inclusion Power cord)3) Separate the outdoor unit connection wirefrom the terminal block.4) If pulling the Main PCB up. it will be takenout.(Separate the TRANS hook. it before).1) Do “1” and “2”, “3”, above2) Loosen two fixing earth screws of right side.3) Separate the connection pipe.4) Separate the bush body at the upper side andholder at the rearside.5) Loosen the two fixing screws of left side.6) Lifting the heat exchanger up a little to pushthe up side for separation from the indoorunit.4-2