Samsung AVXWH series User Manual

E-13ENGLISHSelecting the Cool ModeYou can select the Cool mode if you want to cool your room.You can adjust the temperature and the fan speed when cooling.1 If necessary, press the (On/Off) button.Result:  The operation indicator on the indoor unit lights up. The air conditioner starts up in the mode you selected last. The indoor unit beeps.2 Press the button on the remote control until is displayed.Result:  The indoor unit beeps each time you press the button. The air conditioner runs in the Cool mode.Note You can change modes at any time.3 Press the button to adjust the temperature until the requiredtemperature is displayed.You can set the temperature between 16°C and 30°C.Result:  Each time you press the button:- The temperature is adjusted by 1°C- The indoor unit beeps If the room temperature is higher than the selectedtemperature, the air conditioner starts cooling. If the room temperature reaches the set temperature, the airconditioner stops cooling, but the fan operates consistently.4 Press the button to select the fan speed until the required setting isdisplayed.Automatic (rotated : )LowMediumHighResult:  Each time you press the button, the indoor unit beeps. The fan speed indicator increases and decreasescontinuously and turns round each time you pressthe button.Note The fan speed indicator of the indoor unit varies according to thetemperature in the Automatic fan speed.5 To control the airflow direction, refer to page 21. Control Panel