using advanced functions _27ENGLISHUSING THE ENERGY SAVING FUNCTIONThis function will set the temperature range limit to help you save energy while the air conditioner isoperating in Cool mode.1. Press the Energy saving button on the remotecontrol while the air conditioner is operating in Coolmode.E.Saver indicator and air swing indicator appearautomatically on the remote control display.The air flow blades move up and down.If the current set temperature is lower than 26˚C, it willautomatically raise to 26˚C.• Energy saving function is only available in Cool mode.• When Energy saving function is activated, temperature range will be limited to 26˚C~30˚C.• If the desired temperature is lower than 26˚C, turn off the energy saving function bypressing the Energy saving button again.• Temperature/Fan speed can also be adjusted.(See step 3~4 on page 15 for instructions.)• Air flow can be adjusted manually.(See page 19 for instructions.)To deactivate the Energy saving function1. Press the Energy saving button on the remote control.Energy saving function you set will be canceled and Energy saving indicator will disappear onthe remote control display.AVXWV£ª£ª_IB IM_E_29812.indd 27 2008-11-12 13:43:00