Airing Your RoomE-9ENGLISHIf the atmosphere in your room is stale, you can air it using the Fanfeature. When you operate the air conditioner, air flow blades are open andhalf closed automatically to give the proper air flow.1 If necessary, press the (On/Off) button.Result: ◆ The air conditioner starts up in the mode selectedwhen the unit was last used.◆ The unit beeps twice.2 If the Fan speed (F1,F2,F3) is not displayed on the unit:◆ Press the button on the remote controlor◆ Press the button on the unit one or more timesUntil the fan speed (F1,F2,F3) is displayed.Result: ◆ The unit beeps each time you press the button.◆ The air conditioner starts up in the Fan mode.➢ ◆ You can change modes at any time.◆ When the air conditioner is in the Fan mode, thetemperature is not displayed; in this case, you do notneed to set the temperature.3 To set the fan speed to... Then...Result: Each time you press a button, the unit beeps.4 To control the direction of the air flow, refer to page 10~11.High ◆ Press the button on the remote control.or◆ Press the button on the unit until F3lights upMed ◆ Press the button on the remote control.or◆ Press the button on the unit until F2lights upLow ◆ Press the button on the remote control.or◆ Press the button on the unit until F1lights upRemote Control Control Panel