Samsung AW0801B Owner's Instructions Manual

Also see for AW0801B: Service manual

Contents

E-10Removing Excess HumidityIf the atmosphere in your room is very humid or damp, you can removeexcess humidity without lowering the room temperature too much.You can operate the Dry mode only by using the control panel.1 If necessary, press the (On/Off) button.Result: The air conditioner starts up in the mode selected whenthe unit was last used. The unit beeps.The air conditioner is fitted with a protection mechanism toprevent the unit from being damaged when it is startedimmediately after being: Plugged in StoppedIt will start up normally after three minutes.2 If the dry indicator is not displayed at the top of the control panel,press the button on the control panel one or more times until itappears.Result: The unit beeps each time you press the button. The air conditioner runs in Dry mode.➢ You can change modes at any time.3 To adjust the temperature, press the or buttons one ormore times until the required temperature is displayed.Possible temperatures are between 64°F and 86°F inclusive.Result: Each time you press the or buttons:- The temperature is adjusted by 1°F- The unit beeps The air conditioner starts removing the excess humidity;the quantity of air is adjusted automatically.4 To control the direction of the air flow, refer to page 11.Remote Control Control Panel☛