Samsung AW2400B Owner's Instructions Manual

Contents

E-8Remote Control Control PanelCooling Your RoomTo adjust the temperature, press the or buttons on the remotecontrol or unit one or more times until the desired temperature is displayed.The temperature can be set between 64°F and 86°F.Result: Each time you press the or buttons:– The temperature is adjusted by 1°F and displayed onthe control panel– The unit beeps The air conditioner starts cooling, if the room temperature ishigher than the selected temperature. If the room temperature reaches the set temperature, the airconditioner stops cooling, but the fan is still operating.3Press the (On/Off) button.Result: The air conditioner starts up in the mode selected when theunit was last used. The unit beeps twice.☛ The air conditioner is fitted with a protection mechanism to preventthe unit from being damaged when it is started immediately afterbeing: Plugged in StoppedIt will start up normally after three minutes.If the temperature is not displayed on the control panel: Press the button on the remote controlor Press the button on the unit one or more times until thetemperature is displayed.Result: The unit beeps each time you press the / button. The air conditioner starts up in the Cool mode.➢ You can change modes at any time.You must select the Cool mode if you wish to lower the temperaturein your room. You can also set the Fan speed.12To set the fan speed: Press the , or button on the remote control as desired.or Press the button on the unit one or more times until thedesired Fan speed(F1, F2 or F3) is displayed.LowMediumHigh4To control the direction of the air flow, refer to page 11.5