English - Setting the PC➢ Preset to the PC mode by pressing the SOURCE button.1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press theENTER button. Select the required option by pressing the ▲ or ▼ button, thenpress the ENTER button.4 When you are satisfied with your setting, press the ENTERbutton.5 Press the EXIT button to exit. Auto Adjustment :Auto adjustment allows the PC screen of set to self-adjust tothe incoming PC video signal.The values of fine, coarse and position are adjustedautomatically.Easy Setting1 Press the TOOLS button on the remote control. Press the ▲ or ▼ button to select Auto Adjustment, thenpress the ENTER button. Screen Adjustment: Coarse/Fine/Position/Image ResetCoarse/FineThe purpose of picture quality adjustment is to remove orreduce picture noise.If the noise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (coarse) and Fine-tuneagain.After the noise has been reduced, re-adjust the picture so thatit is aligned on the center of screen.1 Press the ▲ or ▼ button to select Coarse or Fine, thenpress the ENTER button. Press the ◄ or ► button to adjust the screen quality, verticalstripes may appear or the picture may be blurry. Press theENTER button.PositionAdjust the PC’s screen positioning if it does not fit the TVscreen.1 Adjust the position by pressing the ▲/▼/◄/► button. Press the ENTER button.Image ResetYou can replace all image settings with the factory defaultvalues.Move Enter ReturnCoarse 50Fine 11Position Image Reset Screen AdjustmentT VAuto Adjustment in ProgressPlease wait.Image Reset is completed.Move Enter ReturnMode : Standard Cell Light Contrast 5Brightness 45Sharpness 50Auto Adjustment Screen Adjustment Detailed Settings Picture Options Reset : OK PictureT VMove Enter ReturnPositionT VToolsAnynet+ (HDMI-CEC)Picture Mode : StandardSound Mode : CustomSleep Timer : OffSRS TS XT : OffEnergy Saving : OffAuto AdjustmentExitMove Adjust