English - 5Air/Cable5 Press the ▲ or ▼ button select Antenna, then press the ENTER button.Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.➢ Air: Air antenna signal.Cable: Cable antenna signal.Changing the PIP Channel6 Press the ▲ or ▼ button to select Channel, then press the ENTER button.Press the ▲ or ▼ button at the bottom of the remote to select the desiredchannel in the PIP window, then press the ENTER button.Press the EXIT button to exit.➢ You can select only analog TV broadcasts on the PIP screen (sub-picture).Easy Setting1 Press the TOOLS button on the remote control.2 Press the ▲ or ▼ button to select PIP, then press the ENTER button. Press the ▲ or ▼ button to select a particular item.4 Press the ◄ or ► button to select the required option.5 Press the EXIT or TOOLS button to exit.Changing the Position of the PIP Window4 Press the ▲ or ▼ button to select Position, then press the ENTER button.Press the ▲ or ▼ button to select the desired PIP window position, then pressthe ENTER button.➢ In Double Window ( ) and Double Wide ( ) modes, Position cannotbe selected.ReturnEnterPIPPIP : OnSize :Position :Air/cable : CableChannel : Cable 3MoveAirCableReturnEnterPIPPIP : OnSize :Position :Air/cable : CableChannel : Cable 3MoveReturnPIPPIP : On ►Size :Position :Air/Cable : CableChannel : Cable 3Move AdjustPIPPIP : OnSize :Position :Air/cable : CableChannel : Cable 3ReturnEnterMoveCable 11ToolsDevice ListPicture Mode : StandardSound Mode : CustomSleep Timer : OffPIPMove Enter Exit
