Setting up the TV with your PCAuto AdjustmentUse the Auto Adjust function to have the TV set automatically adjust the video signalsit receives. The function also automatically fine-tunes the settings and adjusts thefrequency values and positions.Press the TOOLS button to display Tools menu.You can also set the Auto Adjustment by selecting Tools → Auto Adjustment.TPreset: Press the SOURCE button to select PC mode.This function does not work in DVI-Digital mode.ScreenThe purpose of the picture quality adjustment is to remove or reduce picture noise. If thenoise is not removed by fine tuning alone, then make the vertical frequency adjustmentson your PC and fine tune again.After the noise has been reduced, re-adjust the picture so that it is aligned on the centerof the screen.Preset: Press the SOURCE button to select PC mode.CoarseAdjusts the frequency when vertical noise appears on the screen.FineAdjusts the screen to be clearer.PC PositionAdjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼button to adjusting the Vertical-Position. Press the ◄ or ►button to adjust theHorizontal-Position.Image ResetYou can replace all image settings with the factory default values.❑NN❑NEnglish - 8Brightness : 45Sharpness : 50Auto Adjustment ►ScreenAdvanced SettingsPicture OptionsPicture ResetPictureScreen50 ►38CoarseFinePC PositionImage ResetPC PositionReturnEnterMoveReturnEnterMove
