Samsung BN68-02540B-04 User Manual

Also see for LN32C530: User manual Quick setup guide User manual Quick setup guide User manual

18 EnglishBasic FeaturesDialog Clarity (Off / On)(standard sound mode only)Dialog Clarity emphasizes voice while maintaining thebackground sound level.Preferred language(digital channels only)Digital-TV broadcasts are capable ofsimultaneous transmission of manyaudio tracks (for example, simultaneoustranslations of the program into foreignlanguages).You can only select a language among✎ the ones being broadcasted.Multi-Track sound (MTs)(analog channels only)Mono■ : Choose for channels that arebroadcasting in mono or if you arehaving difficulty receiving a stereo signal.stereo■ : Choose for channels that arebroadcasting in stereo.sAP■ : Choose to listen to the SeparateAudio Program, which is usually a foreign-languagetranslation.Depending on the particular program being broadcast,✎ you can listen to Mono, stereo or sAP.Auto Volume (Off / normal / night)To equalize the volume level on each channel, set to normal.night■ : This mode provides an improved soundexperience compared to normal mode, making almostno noise. It is useful at night.speaker select(External speaker / TV speaker)A sound echo may occur due to a difference in decodingspeed between the main speaker and the audio receiver.In this case, set the TV to External speaker.When✎ speaker select is set to External speaker, thevolume and MUTE buttons will not operate and thesound settings will be limited.When✎ speaker select is set to External speaker, youshould use these settings.TV speaker: Off, External speaker: OnxWhen✎ speaker select is set to TV speaker, youshould use these settings.TV speaker: On, External speaker: OnxIf there is no video signal, both speakers will be mute.✎sPDIF OutputSPDIF (Sony Philips Digital Interface) is used to provide digitalsound, reducing interference going to speakers and variousdigital devices such as an A/V Receiver/Home theater.Audio Format■ : During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.By connecting to 5.1ch speakers in a dolby✎ digital setup, maximize your interactive 3D soundxperience.Audio Delay■ : Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).sound ResetReset all sound settings to the factory defaults.Setup Menusetting the Time¦MEnUO m → setup → Time → EnTERETimeThe current time will appear every time you press the✎ InFO button.Clock■ : Setting the clock is for using various timerfeatures of the TV.If you disconnect the power cord, you have to set✎ the clock again.Clock Mode: Set up the current time manually orautomatically.Auto– : Set the current time automatically using thetime from the digital channel.The antenna must be connected in order to set✎ the time automatically.Manual– : Set the current time manually.Depending on the broadcast station and signal,✎ the auto time set up may not be correct. In thiscase, set the time manually.Clock set: Set the Month, Day, Year, hour, Minuteand am/pm.Available only when✎ Clock Mode is set toManual.You can set the month, day, year, hour and minute✎ directly by pressing the number buttons on theremote control.PPOWERFAV.CHCHLISTMEDIA.PP.MODES.MODEP.SIZECCMTSINFOSLEEPTOOLSFAV.CHMEDIA.PP.MODES.MODEP.SIZECCMTSSLEEPTOOLS