33English04 Advanced FeaturesNetwork Setup (Manual)If the other methods do not work, you need to enter theNetwork setting values manually.Getting the Network Connection ValuesTo get the Network connection values on most Windowscomputers, follow these steps:1. Right click the Network icon on the bottom right of thescreen.2. In the pop-up menu, click Status.3. On the dialog that appears, click the Support tab.4. On the Support tab, click the Details button. TheNetwork settings are displayed.How to set up manuallyTo enter the Network connection values manually, followthese steps:1. Follow Steps 1 through 6 in the “How to set up usingPBC (WPS)” (p. 31).2. Press the ▼ button to select Internet Protocol Setup,and then press the ENTERE button. Press the ▲or ▼ button to select Manual, and then press theENTERE button.3. Press the ▼ button to go to the first entry field (IPAddress).4. Use the number buttons to enter numbers.5. When done with each field, use the ► button to movesuccessively to the next field. You can also use the otherarrow buttons to move up, down, and back.6. Enter the IP Address, Subnet Mask, and Gatewayvalues.7. Press the ▲ or ▼ button to go to DNS.8. Press the ▼ button to go to the first DNS entry field.Enter the numbers as above.9. When done, press the ▲ button to go to Select aNetwork. Select your network, and then press theENTERE button.10. Go to Step 4 in the “How to set up automatically” (p.31), and follow the directions from that point on.If Your TV Fails to Connect to the InternetYour TV may not be able to connect to the Internetbecause your ISP has permanently registered theMAC address (a unique identifying number) of yourPC or modem, which it then authenticates each timeyou connect to the Internet as a way of preventingunauthorized access. As your TV has a different MACaddress, your ISP can not authenticate its MAC address,and your TV can not connect.To resolve this problem, ask your ISP about theprocedures required to connect devices other than a PC(such as your TV) to the Internet.If your Internet service provider requires an ID or passwordto connect to the Internet, your TV may not be able toconnect to the Internet. If this is the case, you must enteryour ID or password when connecting to the Internet.The internet connection may fail because of a firewallproblem. If this is the case, contact your Internet serviceprovider.If you cannot connect to the Internet even after you havefollowed the procedures of your Internet service provider,please contact Samsung Electronics at 1-800-SAMSUNG.