Samsung BN68-02625B-02 User Manual

Also see for UN32C5000: User manual User manual Quick setup guide User manual User manual

Contents

45English05 Other InformationWall Mount Kit Specifications (VESA)✎ The wall mount kit is not supplied, but sold separately.Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contactyour nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.✎ NOTEx Standard dimensions for wall mount kits are shown in the table below.x When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.x Do not use screws that do not comply with the VESA standard screw specifications.x Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screwspecifications. Screws that are too long may cause damage to the inside of the TV set.x For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differdepending on the wall mount specifications.x Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personalinjury. Samsung is not liable for these kinds of accidents.x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used orthe consumer fails to follow the product installation instructions.x Do not mount the TV at more than a 15 degree tilt.x Always use two people to mount the TV to a wall.Product Family inches VESA Spec. (A * B) Standard Screw QuantityLED-TV[Ultra-Slim]19~22 75 X 75 M4423~29 200 X 100M832~37 200 X 20040~55 400 X 40056~65 600 X 400Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due toelectric shock.Anti-theft Kensington LockThe Kensington Lock is not supplied by Samsung. It is a device used tophysically fix the system when using it in a public place. The appearance andlocking method may differ from the illustration depending on the manufacturer.Refer to the manual provided with the Kensington Lock for additionalinformation on proper use.✎ Please find a “K” icon on the rear of the TV. A kensington slot is besidethe “K” icon.To lock the product, follow these steps:1. Wrap the Kensington lock cable around a large, stationary object such asdesk or chair.2. Slide the end of the cable with the lock attached through the looped endof the Kensington lock cable.3. Insert the locking device into the Kensington slot on the product 1.4. Lock the lock.✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.✎ The locking device has to be purchased separately.✎ The location of the Kensington slot may be different depending on the TV model.1