Samsung BN68-03004B-02 User Manual

Also see for 5000 Series: Specifications User manual Quick start guide User manual User manual

Contents

49English05 Other InformationIssues Solutions and ExplanationsNo Picture, No VideoThe TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.• Make sure the wall outlet is working.• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turnson, refer to ‘Remote control does not work’ below.The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Setup menu (p. 19).• If your PC is connected to the TV, check your PC power settings.• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.• When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes ifthere is no signal.There is no picture/video. • Check cable connections (remove and reconnect all cables connected to the TV and externaldevices).• Set your external devices’ (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connectionsto the TV input. For example, if an external device’s output is : HDMI, TV’s input : HDMI• Make sure your connected devices are powered on.• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.• Reboot the connected device by reconnecting the device’s power cable.RF(Cable/Antenna) ConnectionThe TV is not receiving all channels. • Make sure the coaxial cable is connected securely.• Please try Auto Program to add available channels to the channel list. Go to MENU - Channel -Auto Program then select Auto and make sure the correct Cable TV signal type is set in the menu.There are 3 options (STD, HRC and IRC) (p. 13)• Verify the Antenna is positioned correctly.No Caption on digital channels. • Check Caption Setup menu. Try changing Caption Mode Service1 to CC1 (p. 22).• Some channels may not have caption data.The picture is distorted: macroblock error,small block, dots, pixelization.• Compression of video contents may cause picture distortion, especially with fast moving picturessuch as sports and action movies.• A low signal can cause picture distortion. This is not a TV problem.PC ConnectionA “Mode Not Supported” messageappears.• Set your PC’s output resolution so they match the resolutions supported by the TV (p. 11).“PC” is always shown on the source list,even if a PC is not connected.• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.The video is OK but there is no audio. • If you are using an HDMI connection, check the audio output setting on your PC.Network ConnectionThe wireless network connection failed. • The Samsung Wireless USB dongle is required to use a wireless network.• Make sure the Network Connection is set to Wireless (p. 27).• Make sure the TV is connected to a wireless IP sharer (router).Software Upgrade over the network fails. • Try network test in Setup menu (p. 22).• If you have latest SW version, SW upgrade will not proceed.OthersPurple/green rolling horizontal bars andbuzzing noise from the TV speakers withComponent cable connection.• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicatesthat the set-top-box has a grounding issue. Replace the Component video cables with an HDMIconnection.The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3)contents.• Black bars on the top and bottom will appear during movies that have aspect ratios different fromyour TV.• Adjust the picture size options on your external device or TV to full screen.The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.• Clean the sensor’s transmission window on the remote.• Try pointing the remote directly at the TV from 5~6 feet away.The cable/set top box remote controldoesn’t turn the TV on or off, or adjust thevolume.• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for theSAMSUNG TV code.