Samsung BN68-03165C-01 User Manual

Also see for LED 6300 Series: E-manual User manual E-manual Quick start guide User manual

Contents

28 EnglishAdvanced FeaturesNoticeThe picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LANAdapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LANAdapter using a USB cable in a place that is not affected by radio interference.Method 1 Method 2Connect using the USB right angle adapter Connect via an extension cable✎ The Samsung Wireless LAN Adapter should be installed in aninterference-free area in order to avoid interference between theadapter and tuner.To connect the Samsung Wireless LAN Adapter using the USB right angleadapter, follow these steps:1. Connect the USB right angle adapter to the Samsung Wireless LANAdapter.2. Connect the other end of the right angle adapter to the USB 1 (HDD)port.To connect the Samsung Wireless LAN Adapter using an extensioncable, follow these steps:1. Connect the extension cable to the USB 1 (HDD) port.2. Connect the extension cable and Samsung Wireless LANAdapter.3. Attach the Samsung Wireless LAN Adapter to the back of the TVnear the top, using double-sided adhesive tape.Network Setup (PBC (WPS))How to set up using PBC (WPS)If your router has a PBC (WPS) button, follow these steps:1. Connect your TV to Samsung Wireless LAN Adapter asdescribed in the previous section.2. Turn on your TV, press the MENU button on yourremote, use the ▲ or ▼ button to select Setup, andthen press the ENTERE button.3. Use the ▲ or ▼ button to select Network in the Setupmenu, and then press the ENTERE button.4. On the Network screen, select Network Type.5. Set Network Type to Wireless.6. Select Network Setup. The Network Setup screenappears.7. Press the Red button on your remote.8. Press the PBC (WPS) button on your router within 2minutes. Your TV player automatically acquires all thenetwork setting values it needs and connects to yournetwork.9. After the network connection is set up, press theRETURN button to exit the Network Setup screen.Network Setup (Auto)Most wireless networks have an optional security systemthat requires devices that access the network to transmitan encrypted security code called an Access or SecurityKey. The Security Key is based on a Pass Phrase, typicallya word or a series of letters and numbers of a specifiedlength you were asked to enter when you set up security foryour wireless network. If you use this method of setting upthe network connection, and have a Security Key for yourwireless network, you will have to enter the Pass Phraseduring the setup process.orNetwork SetupPBC(WPS) U Move E Enter R ReturnSelect a Network : Not Selected ►Internet Protocol Setup : AutoIP Address :Subnet Mask :Gateway :DNS : AutoDNS Server :