Changing Your Settings 146CalibrationThe Calibration feature allows you to re-align the screen’s touch accuracy. Use this feature only when the devicedoes not respond properly when you touch the screen.1. From Idle mode, touch Menu ➔ Settings ➔ Phone settings.2. Touch Calibration.3. Touch the center of the target and repeat this step for each target that displays.4. Touch OK when the New settings saved... message displays.5. Touch the END key to return to Idle mode.Auto keypad lock1. From Idle mode, touch Menu ➔ Settings ➔ Phone settings.2. Touch On or Off from the Auto keypad lock field.SecurityThe Security feature enables you to restrict the use of your phone by others and to restrict the types of calls.Various codes and passwords are used to protect the features of your phone.1. From Idle mode, touch Menu ➔ Settings ➔ Phone settings.2. Touch Security.Lock PhoneWhen the Lock Phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone passwordeach time the phone is switched on.To change the phone password, refer to the next section.Once you enter the correct password, you can use the phone until you switch it off.1. Touch On or Off from the Lock phone field.T919 Roxy.book Page 146 Thursday, September 25, 2008 5:01 PM
