26ENGSwitching the Television On and Off Automatically (depending on the model)You can set the On/Off timers so that the television will:◆ Switch on automatically and tune to the channel of yourchoice at the time you select◆ Switch off automatically at the time you select➣ The first step is to set the television’s clock (refer to“Setting and Displaying the Current Time” on theprevious page). If you have not yet set the clock, themessage “Set the clock first” is displayed.1 Press the MENU ( ) button.2 Press the ▲ or ▼ button to select the Function and press the œ or√ button.3 Press the ▲ or ▼ button to select the Time, and press the œ or √button.Result: The Time menu is displayed.4 Press the ▲ or ▼ button to select the Timer.5 Press the œ or √ button to set the mode to On.Result: The On time and Off time options are displayed.6 Press the ▲ or ▼ button to select the On time.7 Set the time at which you wish the television to be switched On.To... Press the...Move to the hour or minute œ or √ button.Adjust the hour or minute ▲ or ▼ button.8 In the same way, set the time at which you wish the television to beswitched Off.9 When you have finished setting the On/Off time, press the EXIT( ) button or press the MENU ( ) button repeatedly to return tonormal viewing.➣ Absent Power OffWhen you set the timer “On”, your television willeventually be turned off, if you do not operate any controlsduring the 3 hours after the TV is turned on by timer.This function is available in only the timer “On” mode andwill prevent a leakage accident or overheating, caused byyour TV left on for a long time due to the timer “On”(when you are away on holiday, for example).FunctionLanguage : EnglishTime √Plug & Play √Blue Screen : OffChild Lock √Select Enter ExitFunctionTimeClock 11 : 35Timer OffSelect Adjust ExitFunctionTimeClock 11 : 35Timer OnOn time - - : - -Off time - - : - -Select Adjust ExitFunctionTimeClock 11 : 35Timer OnOn time 07 : 00Off time - - : - -Select Adjust ExitFunctionTimeClock 11 : 35Timer OnOn time 07 : 00Off time 23 : 00Select Adjust Exit