Samsung CB21K22 Owner's Instructions Manual

Also see for 14F2, 14F3, 14H4, 14H5, 14S1,: Owner's instructions

Contents

12ENGExitP 1471 MHz 48 %Storing the Channels AutomaticallySelect Enter ExitMode CustomAdjustSize : NormalPictureSelect Enter ExitAuto StoreManual StoreAdd/EraseFine TuneSortChannelSelect Adjust ExitSortFrom : P 1To : P--Store : ?ChannelSelecting a Channel Numbered Ten or OverWhen using the numeric buttons to select a channel stored atprogramme position ten or higher, follow the instructions below.1 Press the -/-- button.Result: The “--” symbol is displayed.2 Enter the two-digit channel number.Example: To select channel 42, press 4, followed by 2.You can scan the frequency ranges available on your television andin your country and store all the channels found automatically.The channels are stored in the order in which they appear in thefrequency bands. It is possible that the automatically allocatednumbers may not correspond to those by which you wish toidentify the channels. If this is the case, refer to “Sorting the StoredChannels” on page 16.1 Press the MENU button.2 Press the or button to select the “Channel”.3 Press the + or – button to select the “Auto Store”.4 Press the + or – button again.Result: The horizontal bar is displayed, and then channels arestored in an order which reflects their positions in thefrequency range. Finally, the search will end automatically.5 When searching and storing is complete, the “Sort” menu isdisplayed.To... Then...Sort the stored channels Go to Step 4 of the “Sortinginto the desired numerical order the Stored Channels”procedure on page 16.Exit the channel store function Press the MENU buttonwithout sorting the channels repeatedly until the menusdisappear.➣ If sound does not work regularly after storing channels, selectthe sound system which best corresponds in “Manual Store”menu (refer to the opposite page).