E-16Installing the safety net & air blocking kitsThe electriccomponentbox coverThe safety netTechnical Specification & Product featureModel CH070CAV1 CH105CAV CH140CAVCapacity (Cooling andHeating) 24,000/27,000Btu/h 36,000/38,000Btu/h 48,000/54,500Btu/hPower input 2,250W/2,300W 3,400W/3,400W 5,100/5,200WRunning current 10.2/10.3A 14.5/14.7A 22.0/23.0ARefrigerant 1,900g 2,800gFuse 30A 30AMaximum installation height: up to 11.8ft(3.6m)Condensate discharge pump(built-in): Max. 29.5inch(750mm)Length of pipes and difference in height: see the outdoor unit installation manualVacuum and refrigerant charge: see the outdoor unit installation manualInstall the safety net after installing the connection cord and fixing electriccomponent box cover. For your safety, you must install the safety net.For details about installing the panel, refer to the manual for the panel.1 Uncover the wrap of safety net.2 Fix the safety net to the electric component cover box with four screws asindicated.Safety net1 When installing the unit depending on the situation, you can fill up the airoutlet(s) with one or more air blocking kits (not supplied). Then install theinsulation to block air completely.Air blocking kitsThe maintenance of this unit is normally done by qualified personnel,as following a “Commercial product”. So, if manufacturer puts therecommendation to do by qualified personnel, manufacturer can avoidsupplying safety net and screws to fix it. (cost reduction)Put safety net as optional kit.CAUTIONAir blockingkitsInsulationAir Marketing Group LLC141 Kinderkamack Rd, Park Ridge, NJ 07656 Tel: 201-782-1782 Fax: 201-782-1783 Web: www.amgair.com Email: info@amgair.com