Samsung CHT-420 Instruction Manual

Also see for CHT-420: Service manual Instruction manual Service manual Manual de instrucciones

3938The Tracking adjustment removes the white lines that sometimesappear during playback because of slight differences in recordingdecks. The TRK button will automatically align the recorded trackswith the playback heads to solve this problem. You may also settracking manually.1 Adjust Tracking ManuallyDuring playback, press the TRK or TRK ❷ buttons to move thewhite lines out of the picture.2 Ajust Tracking AutomaticallyIf you press the ATR key on the remote control during VCRplayback, the tracking on the VCR will be set automatically.112While a videotape is playing, you can enjoy a variety of specialplayback features, including Still, Frame Advance, Skip, Repeat, andmore. Press the Play button again to resume normal playback.1 StillFrom Play mode, press Play/Pause to still a single frame.2 Cue/ReviewFrom Play mode, press F.Forward (❿❿) or Rewind (➛➛) tocue/review at two speeds:• Picture Search — Press and release to advance the tapeforward or backward at 5 times normal speed.• Jet Search — Press and hold to advance the tape forward orbackward at 7 times normal speed.3 RepeatFrom Play mode, press Repeat to review the last 5 seconds of tape(SP mode).Special VCR Playback FeaturesPress the INFO. button to see thecurrent status of the VCR deck, as wellas the tape counter position andrecord speed.22PLAY0:00:00 SPTracking Adjusting Picture Alignment AutomaticallyMP3 PlaybackMP3 is a popular music format which allows you to compressmusic files up to 1/12 of their original size while retaining near CDquality sound. Your DVD-VCR can playback MP3 files burned ontoa CD-R disc.1 Insert DiscInsert a CD-R with MP3 files into the DVD deck.• The MP3 main menu will appear after a few seconds and thefirst song on the disc will begin playing.2 Select FolderPress the up/down buttons to select the folder on the CD-R whichcontains the MP3 files you want to hear, then press Enter to select.• If there are more than 8 folders on the disc, press RETURN toview additional folders.• If there are no folders on the CD-R, skip to Step 3.3 Select MP3 FilePress the up/down buttons to select the desired MP3 file.• If there are more than 8 MP3 files in the selected folder, pressthe left/right buttons to view additional MP3 files.• File names are truncated to eight characters: the first sixcharacters of the song, plus an asterisk (*), then a number.• Press the Return button to back up and select another folder.4 Play MP3 FilePress the ENTER button on the remote control to play the selectedsong.• While the song is playing, you can use the up/down buttons tobrowse through other folders.5 Stop MP3 SelectionPress the (Stop) button on the remote control to stop playback.* To ensure proper playback of discs burned from MP3 files, makesure the files have been recorded at a bit rate of at least 128 kbps.* If there are any gaps (blank data) on multi-session discs, you mayexperience playback problems.* On discs that are recorded with a Variable Bit Rate(VBR), e.g.from 32 to 320 kbps, the sound may cut in and out.* When the REPEAT button is pressed during playback, the currentsong will be played back repeatedly.RETURN ❷ ENTERMP3music c1song1~~1 music c12 music c23 music c3RETURN ❷ ENTERMP3music c1song1~~1 song 12 song 23 song 34 song 45 song 56 song 67 song 78 song 8 ❿