Samsung CI-15K22T Owner's Instructions Manual

Contents

10ENGPlug & Play FeatureWhen the television is initially powered ON, three basic customersettings proceed automatically and subsequently: setting thelanguage, channel and clock.1 If the television is in Standby mode, press the POWER buttonon the remote control.Result: The message “Plug & Play” is displayed. It flickers for alittle while and then the “Language” menu is automaticallydisplayed.2 Press the ▲ or ▼ button to select required language. Press theMENU button to enter the language, and then the message “Ant.Input Check” is displayed.➣ If any language is not selected on the “Language” menu, the“Language” menu will be displayed about 30 seconds later.3 Make sure that the antenna is connected to the TV. And then pressthe + or – button to store the channels (refer to “Storing theChannels Automatically” on page 12).Result: The horizontal bar is displayed, and then channels arestored in an order which reflects their positions in thefrequency range.4 When searching and storing is complete, the “Time” menu isdisplayed.5 Press the + or – button to move to the hour or minute. Set the houror minute by pressing the ▲ or ▼ button (refer to “Setting andDisplaying the Current Time” on page 23).6 When you have finished, press the MENU button.Result: The message “ENJOY YOUR WATCHING” is displayed,and then the channel which has been stored will beactivated.7 If you want to reset this feature...1 Press the MENU button.2 Press the ▲ or ▼ button to select the “Function”, and thenpress the + or – button.3 Select the “Plug & Play” by pressing the ▲ or ▼ button, andthen press the + or – button.Result: The message “Plug & Play” is displayed.FunctionLanguage : EnglishPlug & Play Blue Screen : OffChild Lock Plug & PlayENJOY YOUR WATCHINGAnt. Input CheckP 1471 MHz 48 %TimeClock 11 : 35